Chicken farming equipment and utensils

1. Chicken cage is the main equipment for cage chicken houses.

(1) chick cage: it is used to raise chicks in a cage, generally 3-4 layers of overlapping cage.The total height of the cage is about 1.7 meters, and the foot of the cage frame is 10 ~ 15 cm high. The length of each single cage is 70 ~ 100 cm, the height of the cage is 30 ~ 40 cm, and the depth of the cage is 40 ~ 50 cm.The mesh is usually rectangular or square, with a diameter of 1.25 cm 1.25 cm for the bottom mesh and 2.5X2.5 cm for the side and top mesh.The cage door is set in the front, the cage door clearance can be adjusted for 2 ~ 3 cm, each cage can accommodate about 30 chicks.

(2) broiler cage: the combined form mostly adopts three-layer overlapping type, with the overall width of 1.6 ~ 1.7 meters and the height of 1.7 ~ 1.8 meters.The single cage is 80 cm long, 40 cm high and 42 cm deep.Cage bottom mesh 4 cm x 2 cm, the rest of the mesh are 2.5 centimeters by 2.5 centimeters.The size of the cage door is 14 cm x 15 cm, each single cage can accommodate 7 ~ 15 broilers.

(3) Layer battery cages: The common forms are stepped, semi-stepped and overlapping. Each single cage is 40 cm long, 45 cm deep, 45 cm high at the front, 38 cm high at the back, and 6° at the bottom of the cage. ~8°. The egg collecting trough extending out of the cage is 12 to 16 cm. The front of the cage door is open, 21 to 24 cm wide; 40 cm high; the lower edge leaves a gap of 4.5 cm from the bottom net. The cage bottom mesh has a hole spacing of 2.2 cm and a weft pitch of 6 cm. The pore size range of the top, side and back nets varies greatly. Generally, the mesh spacing is 10-20 cm, the weft spacing is 2.5-3 cm, and each single cage can raise 3~4 chickens.

Different poultry equipment suppliers will provide chicken coops of different sizes, as the case may be.

2. The feeding equipment includes a feeding machine and a trough. The feeding system of the large chicken farm is mechanized, and the feeding machinery is equipped with a trough.

(1) Chain feeder: It is the most commonly used feeder in China's feeding machinery. It can be used in both flat and cage. It consists of a bin, a link, a drive, a corner wheel, a long trough, and some, and some are equipped with a feed cleaner.

(2) Plug-type feeder: It is designed for dry chicken houses and is suitable for conveying dry powder full-price feed. The 9WS--35 plug-in feeder consists of transmission parts, material boxes, troughs, conveying parts, corners, brackets and other components.

(3) Trough: common long trough and bucket-shaped round trough.